GB3UHF
Installation photos
The Jaybeam
7040420 3 element yagis at 36 metres AGL, pointing 288 and 348 degrees and
installed between the existing GB3VHF yagis
The Trimble
Bullet III GPS antennas used for receiving GPS which is used for beacon
frequency and timing determination. GB3VHF and GB3UHF use seperate antennas for
added resilance.
The 100
metres of Cellflex LCF78-50JA coaxial cable used for the beacon
The Fairseat
beacon site in Kent
The GB3UHF
beacon transmitter installed in the lower half of the new 18U rack and
connected to the main and GPS antenna systems